We put spray foam insulation in Bathurst Manor houses at the tight, leaky spots, the rim joist and the basement walls, and blow loose fill across the attic floor. Our crew is about 5 km away. The M3H postal area takes in Bathurst Manor, Wilson Heights and Downsview North, and this page is for all three.

Built from 1954 to the early 1960s

Bathurst Manor is a suburban neighbourhood built between 1954 and the early 1960s, on a plateau between Finch Avenue West, Dufferin Street, the west branch of the Don River and Sheppard Avenue West. Unless someone has opened up the insulation since then, you are living with whatever the builder put in.

In a house that old, the rim joist may never have been insulated. That is the framing the floor joists end against, right above the concrete. In an unfinished basement, look up to where the wall meets the floor above and you will see it. Bare wood there, plus a cold strip of subfloor along the edge, tells you outside air is getting in along that line. We cover the whole job on our basement and crawl space insulation page.

Cold basement, hot bedrooms

A house can be cold at the bottom and hot at the top, and each end has its own cause. Winter cold gets in low: through a bare rim joist, gaps along the sill plate and basement walls with nothing on them. The floor above feels drafty because the air under it came straight in from outside.

Summer heat comes from the roof. Sun heats the attic, and a thin or flattened layer on the attic floor lets that heat sink into the bedrooms underneath. So the upstairs bakes while the basement stays cool. More on that in why your upstairs bakes in July, and what fixes it.

Fix one end and the other stays the same. When a house has both problems, we look at the basement and the attic before we quote.

Foam below, blown-in above

Foam goes where the space is tight and leaky, and blown-in goes where there is open room to fill. In Bathurst Manor houses, that puts spray foam at the rim joist and on the basement walls. We spray closed-cell foam into each joist bay. It seals the air gaps around the sill plate and insulates the band in one layer, and it slows vapour on its way to the cold foundation. Push a batt into the same bay and air still moves around its edges.

Foam is the wrong choice for an open attic floor. Loose-fill fibreglass or cellulose blown across it settles in around the joists and wiring, ends up at an even depth and can be topped up later. Our attic insulation page walks through a top-up.

When the old attic layer is wet, flattened or full of mouse droppings, we take it out and clean up before anything new goes in. Grey-brown, pebbly fill could be vermiculite. We don't touch it, and we'll ask you to have a qualified lab or abatement firm test it before anyone works in that attic. A rebate may cover part of either job, though the program's current terms decide who qualifies. You'll find all six of our services on the First Choice Insulation home page.

Nearby: Downsview, Northwood Park and Willowdale

Downsview is among the closest areas we serve to Bathurst Manor. Northwood Park has a page too, and so does Willowdale, the third of the nearest three.

Local details for Bathurst Manor

About Bathurst Manor: Bathurst Manor, ON on Wikipedia ยท Bathurst Manor on Google Maps

FAQ

Insulation questions from Bathurst Manor

Yes, a bare rim joist is worth insulating. Bathurst Manor went up between 1954 and the early 1960s, so the rim joist in a house here may never have been covered. Closed-cell spray foam seals the gaps at the sill plate and insulates the band in the same layer.

Your basement is cold because outside air gets in low, and your upstairs is hot because summer heat comes down through the attic floor. Down low, the leaks are at the rim joist and basement walls, and foam handles those well. Up top, the attic floor needs a deeper layer of blown-in insulation. Each end gets its own fix.

It builds depth across the whole open floor for less, once the gaps around the hatch, wires and pipes are sealed. On a house built between 1954 and the early 1960s, if the attic floor is open space between the joists, loose fibreglass or cellulose can be blown to full depth. Foam earns its place lower down, at the rim joist.

Get a quote

Arrange an insulation visit in Bathurst Manor

Call (437) 563-1415 or send the form. Tell us which room is cold, drafty or hot. We will come look at the spot behind it and give you a straight written quote.

Call Text Quote