Spray Foam Insulation in Downsview, ON
Spray foam for leaky rim joists and crawl spaces in Downsview's post-war houses, and blown-in fibreglass or cellulose where the attic floor has gone thin.

Spray foam insulation in Downsview goes into the tight, leaky spots of a house, and where there is open room to fill we blow in fibreglass or cellulose. We're a North York insulation contractor, about 4 km from Downsview's M3L postal area. This page covers M3K, M3L, M3M and M3N, including the streets around Jane and Finch.
Post-war and 1960s houses
Downsview has several large post-World War II subdivisions. Most of its houses went up right after the war and through the 1960s. A few newer houses and condos have been built recently near Sheppard West station.
A house that age may have a bare rim joist and a thin attic floor. Left uncovered, it lets outside air reach the floor above through every gap between the wood and the concrete. Spray foam in Downsview houses does its best work right here. Closed-cell foam fills the gaps and stops the air. It slows vapour too, which a batt pushed into the joist bay can't do. For the walls below it, see our page on basement and crawl space insulation.
Attic insulation in Downsview houses from that era is a different job. When the attic floor is open and the old layer has thinned out, blown-in fibreglass or cellulose fills it evenly from one side to the other. Foam across a whole open attic floor would cost more and do no more. Up there, foam goes at the gaps around the hatch, the plumbing stack and the wiring holes, to stop air leaking up before the loose fill goes on top. Everything we do comes back to that split: foam for tight spots, loose fill for open room.
From the Mosquito factory to Downsview Park
During the Second World War, de Havilland built some 1000 DH 98 Mosquito aircraft at Downsview, and the former base is now being redeveloped as Downsview Park. We spend more of our time on the houses around it. A post-war house near the park has the same weak spots as any other Downsview house that age: the top of the basement wall and the attic floor.
Jane and Finch
Jane and Finch is mostly single-family detached and semi-detached houses plus several high-rise apartment buildings, and much of it went up in the 1960s.
In a detached or semi that age, cold floors and drafts often come from the rim joist and from the floor over a garage or crawl space. Air gets in where the framing meets the foundation and chills the subfloor from below. A room over an unheated space is only as warm as whatever is packed between the joists under it.
Spray foam suits a crawl space where the joist bays are short, crowded with pipes and ducts, or hard to reach. Open, clean bays take blown-in material. Our page on cold, drafty floors over a crawl space or garage explains how we choose between them.
Nearby: Bathurst Manor, Northwood Park and Lawrence Manor
Bathurst Manor is one of Downsview's nearest neighbours, and our crew works there too. We cover Northwood Park too. Lawrence Manor is the other close neighbour, with a page of its own.
Local details for Downsview
- Postal codes: M3L, M3K, M3M, M3N
- Distance: About 4 km away in a straight line
- Permit rules: toronto.ca
- Nearby: Bathurst Manor, Northwood Park, Lawrence Manor
About Downsview: Downsview, ON on Wikipedia ยท Downsview on Google Maps
FAQ
Insulation questions from Downsview
Start with the air leaks: the rim joist at the top of the basement wall and the gaps in the attic floor. Then add depth to the attic insulation. Warm air escaping through those gaps carries heat out with it, and a thicker layer on top won't stop that. With the gaps closed, a top-up of blown-in fibreglass or cellulose on the attic floor can do its job.
Spray foam is worth it on the rim joist of a basement in Jane and Finch, and less often on the full foundation wall. The rim joist is short, leaky and awkward to reach, which is the kind of spot closed-cell foam handles well. A long, dry stretch of wall can do fine with other materials. If foam is more than your wall needs, we'll tell you.
No. A Downsview house can have insulation added or replaced without a building permit from the City; the Zoning Bylaw still applies, so check it if the insulation is part of a bigger change to the house.
Get a quote
Arrange an insulation visit in Downsview
Call (437) 563-1415 or send the form. Tell us which room is cold, drafty or hot. We will come look at the spot behind it and give you a straight written quote.





